重凃時間（以干膜30微米，25-30°C計）：4小時左右

 施工條件：請不要在潮濕或寒冷的天氣（氣溫低于5°C，相對濕度大于85%）情況下施工，否則不能達到預期的涂裝效果。

 保養時間：7天/25°C，低溫適當延長，以獲得理想的漆膜效果。

 清  洗：涂裝中途停頓及涂裝完畢后，請及時用清水清洗所有器具。

 涂裝后處理：由于漆膜具有柔韌型，因此須用刀或其他利器將用于保護門、窗等處的遮蔽膠帶割除。

 貯存方法：密封存放于陰涼干燥處，嚴防霜凍。

 安全事項：

 1.使用前請仔細閱讀產品施工說明，以獲得可靠和滿意的涂裝效果。

 2.施工時盡量打開所有門窗，確保施工區域有較好的通風條件。

 3.使用過程中請佩戴防護用具，如不慎沾染眼部，請立即用大量清水沖洗，并尋求醫療救助。

 4.為保證最佳涂裝效果，請維護好施工現場的清潔、避免木器漆和墻面漆同時施工，按照先施工木器漆，待干燥后再施工乳膠漆的施工順序來操作。
 

 Construction conditions：Do not wet or cold weather（the temperature is below 5°C，relative humidity greater than 85%）under construction,or can not achieve the desired coating effect.

 Maintenace time：7 days/25°C,appropriate to extend the low temperature in order to obtain the desired effect of film.

 Cleaning：painting discontinuation and painting after,wash all utensils with water.

 Coating post-treatment：As the film having flexibility,and therefore subject to a knife or other tool to be used for the protection of the door,window,etc.The masking tape circumcision.

 Storage：sealed stored at 0-35°C cool and dry place to prevent frost.

 Safety Precautions：

 1.Use products please read carefully before construction instructions,toobtain reliable and satisfactory coating.

 2.Try to open all the doors and windows in the construction,to ensure that the construction area has good ventilation conditions.

 3.Use,please wear protective equipment,such as accidentally contaminated yey,rinse immediately with plenty of water and seek medical aid.

 4.To ensure the best paint effects,maintaining good construction site clean，avoid simultaneous construction of wood finishes and paint the walls,wood coatings in accordance with the first construction,construction latex paint to be dried before construction sequence to operate.